The original LEGO brick separator was introduced in 1990 and was produced until 2011. It was the first dedicated tool that was made specifically for separating LEGO plates and removing tiles. It saved many LEGO elements from tooth marks, and many teeth from getting chips and cracks. This first version of the brick separator came in dark-gray and green, and was available in several of the larger sets and could also be purchased as a separate item.
An updated version of the original brick separator was introduced in 2012 and is produced to this day. It has a slimmer handle, but other than that, it serves the same purposes as the original brick separator (separating plates and removing tiles), with the additional feature of an axle remover, and the ability to remove jumper-plates. This version of the brick separator is available in orange, dark-turquoise, and green, and is added to pretty much all medium to large LEGO sets.
A wider version of the brick separator was introduced with the LEGO Art mosaic sets in 2020. As this tool is four studs wide instead of two, it can remove more tiles and plates at once. This is very helpful when taking apart large LEGO mosaics made with LEGO tiles and plates. This tool is only available in the LEGO Art sets and only in black (as of this writing). See the.
The above-mentioned brick separators work great, and especially since LEGO has been including them in so many sets, they have become commonly used tools by young and old LEGO fans alike (although some of us who grew up using our teeth needed some reeducation). They can be used for taking apart a great variety of connections in a wide variety of situations.
However, as the standard brick separator is two studs wide and almost ten studs long, it could not be used in small and tight spaces. So, we still needed another tool for these connections. LEGO fans (and even LEGO designers) have been using the flat end of the minifig crowbar and screwdriver for removing single tiles and to reach into tight spaces. These little tools work well, however because they are so small, they are a bit awkward to handle. To eliminate this problem, some people modify them in various ways to make the handles longer.
A variation of the LEGO screwdriver and crowbar is the recently introduced tile remover key that comes in several of the new LEGO DOTS sets. This little tool has the flattened end of the screwdriver and crowbar that can easily slip under tiles, and it has a heart-shaped handle. It basically looks like a small key. In fact, in the LEGO DOTS sets it serves the dual purpose of a key and a tile remover. This tool is only available in dark-azure at this time, but I expect it will come in other colors as well in future LEGO DOTS sets.
This is a super useful little tool that’s easy to use and easy to get. If you are curious to check it out, it is available in the(1 key), the (two keys), the (3 keys), and the four recently released (1 key in each). To purchase one or more of these sets, visit the .
An interesting variation of the standard LEGO brick separator is made by Mega Construx. It is similar in size as the standard LEGO brick separator, but it has some extra functions – all fully compatible with LEGO connections. I was visiting the Mega Construx factory when this tool was just introduced, and was given a copy as a gift. It’s called the nine-in-one tool, because it has nine different functions. I will describe the functions below, and I also added a video to demonstrate them. This tool was included in some of the Mega Construx Inventions sets, which are similar to LEGO Creator. Although this line has been discontinued, you can still find them on Amazon:
Here are the functions: 1.) At the top of the tool, there is a 2×2-stud plate, which serves as a slider. When the slider is pulled back, the tool works as the standard LEGO brick separator to remove plates from the top of other elements. 3.) In the same configuration, the tool can be used to remove jumper-plates (works the same way as the LEGO version). 3.) When the slider is pushed forward, two studs appear at the tip of the tool, which allows the removal of plates from underneath other elements. 4.) There is a lip at the front of the tool for removing tiles (works the same way as the LEGO version). 5.) This same lip can also be used upside down to remove tiles. This side of the lip has a different angle, so it works better in some circumstances (the LEGO version can also be used upside down in a similar manner). 6.) There is an axle remover on the right side of the tool. 7.) There is a Technic pin remover on the left side of the tool. 8.) There is a small slot at the back of the handle, which allows grabbing, twisting, and removing standard rods. 9.) There is a larger rounded slot a bit further down the handle, which allows grabbing, twisting, and removing larger bar elements (these have been very common in the Mega Construx building system, and only recently introduced in the LEGO system).
If you have been in the LEGO hobby for a while, you know how hard it is to separate some elements. Even if you never used your teeth, you likely got seriously split and cracked fingernails. The LEGO brick separator has been a game changer, especially since LEGO has been including them in all the larger sets. Most of us have several brick separators lying around as we build, with many more spare ones in our collection. The newly introduced LEGO tile remover key can be a great addition to the brick separator when you need to make adjustment in small and tight spaces. And, if you don’t have one, you can always borrow one of the prying tools from your minifigs.
What do you think? Do you use the LEGO brick separator regularly? What about the smaller tools? And what do you think of the new tile remover key? Are there any other tools you use for separating elements that you really like? Feel free to share and discuss in the comment section below!
And you might also like to check out the following related posts: